MiDAS2.0 Family (ISP Flash MCU)
Download (Documentation Materials)

PRODUCT

Brief User's Manual (Eng)

Brief User's Manual (Kor)

User's Manual

GC89C591A0

100-TQFP

(Down)

(Down)

(Down)

64-LQFP

64-TQFP

44-MQFP

44-PLCC

GC81C591A0

100-TQFP

64-LQFP

64-TQFP

44-MQFP

44-PLCC
General Description
  • MiDAS2.0 family offers very fast performance available in 80C52-compatible microcontroller. It features a newly-designed processor core that executes each instruction up-to 3 times faster than original 80C52 processor at the same clock speed.

  • In addition to the heritage of MiDAS1.0 family, MiDAS2.0 family provides very powerfull peripherals such as two 6-channel PCA¡¯s and an additional UART. A total of 18 external interrupt sources (12 in PCA), 12 channel PWM output, and up to 80 general purpose IO ports (100-TQFP) make MiDAS2.0 family outstand for a variety of system control applications.

  • CORERIVER Technology offers not only the chips but also its user-friendly development tools such like 1) MDS (MCU Development System), 2) S/W generation and debugging tools including optimizing C-compiler, 3) Application system, and 4) ROM writer.
Application Areas
  • Motor Control, Consumer Electronics, Gaming Equipment, Home Appliance (Washers, Microwaves, etc.) Building Security and Door Access Control, Building Energy Control and Management, Industrial Control and Automation.
Features
  • CPU
    - 8-bit turbo 80C52 architecture
    - 4 cycles/1 machine cycle
    - Pin/instruction level compatible with Intel 80C52

  • 62 KBytes FLASH
    - ISP by serial interface (EJTAG)
    - IAP and virtual EEPROM for data (2KByte)

  • On-chip H/W debug engine for ICE.

  • 2 KBytes RAM
    - 256 bytes IRAM
    - 1,792 bytes AUXRAM (Accessed with MOVX)

  • Fully programmable 80 I/O pins (for 100-TQFP)
    - Quasi-bidirectional intel type ports : P0 ~ P4
    - Input/Output and pull-up control : P5 ~ P9
    - TTL & CMOS compatible logic levels : P0 ~ P3
    - CMOS levels : P4 ~ P9
    - All ports are initialized with asynchronous reset on power up.

  • EMI reduction mode : Optional ALE disable

  • Low Voltage Detector

  • 27-bit Programmable Watchdog Timer

  • Three 16-bit Timer/Counters

  • Two Full-Duplex UART
    - Automatic address recognition

  • Two 6-module Programmable Counter Array
    - 8-bit Pulse Width Modulator for dynamic PWM.
    - 16-bit Compare/Capture
    - High Speed Output

  • 8-channel 10-bit ADC
    - Max 400K sample per second (@40 MHz)
    - Programmable input clock frequency

  • 16 interrupt sources (with 6 external sources)
    - Timer0/1/2, UART0/1, PCA0/1, ADC, WDT, LVD, and 6 External
    - Four/Two-level interrupt priority

  • Wake-up from power-down
    - External reset
    - External interrupt 0/1
    - WDT interrupt or reset

  • Reset scheme
    - On-chip power-on-reset
    - External reset
    - Low voltage detector reset
    - Optional Watchdog timer reset

  • 3.0V to 3.6V supply voltage

  • Operating temperature : -20 ¡É to 85 ¡É

  • On-chip oscillator with external crystal
    - Max. 40 MHz internal operating frequency

  • Internal Ring oscillator running at 2.8 MHz

  • Power consumption
    - Active current : Max 30mA @ 3.3V, 40MHz
    - Idle current : Max 20mA @ 3.3V, 40MHz
    - Stop current : Typ. 2uA (Max. 10 uA)

  • E.S.D. protection up to 2,000V

  • Latch-up protection up to ±200mA

  • Package
    - 44-PLCC/MQFP
    - 64-SPDIP/LQFP
    - 100-TQFP