OpticCore Family (Application-Specific MCU for Visible & Optic Sensor)
Download (Documentation Materials)

PRODUCT

Spec. Sheet(Eng)

Brief User's Manual (Eng)

OpticCore110

32-OPQFN

(Down)

N/A

Download (Support Application)

HEADER

EXAMPLE

APPLICATION

N/A

N/A

N/A

 

Features
  • CPU
    - 8-bit Turbo 80C52 Architecture
    - 4Cycles / 1Machen Cycle
    - Instruction level Compatible with Intel 80C52
     
  • 16kB(OpticCore110) FLASH(Including 1kB User EEPROM)
     
  • 512B(OpticCore110) Internal Aux. RAM
     
  • 256B Internal RAM
     
  • Operating Voltage : +2.7V ~ +3.6V
     
  • Operating Frequency : Max . 48MHz
     
  • Max. Programmable 21 (OpticCore110) I/O Pins
    - Push-Pull Control, Open drain, Push-Pull Output
    - TTL & CMOS Compatible Logic Levels
     
  • LVD (Low Voltage Detector) : +1.6V
     
  • Internal RING Oscillator with Calibration Function
    - 48MHz     (±3%) @ +3.0V
     
  • The Optic Sensor, consisting of Photodiode in a Device
     
  • 11-channel(OpticCore110) Touch Sensors
    - Capacitive Type Touch Sensing
    - Digital Sensing
    - 16-bit Level Resolution
     
  • Supporting ISP / IAP / MDS
     
  • Three 16-bit Timer / Counters
     
  • 26-bit Programmable Watchdog Timer(WDT)
     
  • 1-Channel UART Comm.
     
  • 2-Channel I2C Comm. (Master/Slave)
     
  • 1-Channel SPI Comm.
     
  • 12-channel (OpticCore110) 8-bit High Speed PWM for LED Dimming
     
  • 15-channel (OpticCore110) 12-bit ADC
      
  • Max. 15 Interrupt Sources
    - Timer 0/1/2, WDT, LVD, I2C 0/1, SPI, UART, ADC, TS
    - 5 External Interrupt Source : Both Edge / Level
    - Two-Level Interrupt Priority
     
  • Reset Sources
    - On-chip Power-On-Reset (POR)
    - External Reset
    - Low Voltage Detector Reset (LVR)
    - Watchdog Timer Reset
     
  • Power Down Wake-up Sources
    - Reset Sources + 5 External Interrupt (Both Levels)
    - WDT Interrupt
     
  • Power Consumption
    - active current         :  Max 1mA @3.3V, 2MHz
    - idle current          :  Max 0.5mA @3.3V, 2MHz
    - stop current         :  Max 60uA @3.3V (All Clock Off)
     
  • E.S.D. Protection Up to 8,000V
     
  • Latch-up Protection Up to ±200mA
     
  • Package
    - 32-OPQFN(5mm X 5mm) : OpticCore110