HallCore Family (Application specific MCU for Hall Sensor)
Download (Documentation Materials)

PRODUCT

Spec. Sheet(Eng)

Brief User's Manual (Eng)

HallCore110

20-MLF

(Down)

(Down)

Download (Support Application)

HEADER

EXAMPLE

APPLICATION

Down

N/A

N/A

 

Features
  • CPU
    - 8-bit turbo 80C52 architecture
    - 4 cycles/ 1machine cycle
    - instruction level compatible with Intel 80C52
     
  • 1kB FLASH (Including 128B User EEPROM)
     
  • 128B Internal RAM
     
  • Operating Voltage : +2.2V to +3.6V
     
  • Operating Frequency : Max. 6MHz
     
  • Max. Programmable 16 I/O Pins
    - Push-Pull Control, Open drain, Push-Pull Output
    - TTL and CMOS compatible logic levels
     
  • Low Voltage Detector (LVD) : +2.2V
     
  • Internal RING OSC with Calibration Function
    - 4MHz     @ +3.0V (±3%)
    - 32kHz @ +2.7V (±10%) :  Low Power OSC.
     
  • 1 - aixis Hall Sensor
     
  • 8-channel 10-bit ADC
     
  • Supporting ISP / IAP / MDS
     
  • Two 16-bit Timer/Counters
     
  • 16-bit Programmable Watchdog Timer
     
  • 1-Channel I2C Comm. (Master/Slave)
     
  • 1-channel UART Comm.
     
  • 1-channel 8-bit high speed PWM
     
  • 11 Interrupt Sources
    - Timer0/1, WDT, ADC, UART, PWM, I2C0
    - 4 External Interrupt Source : Both Edge/Level
    - Two-level interrupt priority
     
  • Reset Sources
    - On-chip Power-On-Reset (POR)
    - External reset
    - Low Voltage Detector Reset (LVR)
    - Watchdog Timer Reset
     
  • Power Down Wake-up Sources
    - Reset Sources + 4 External interrupt (Both Lvevls)
    -     WDT interrupt
     
  • Power Consumption
    - Active Current         :  Max 2mA @+3.0V, 2MHz
    - Idle Current            :  Max 0.5mA @+3.0V, 2MHz
    - Stop Current           :  Max 5uA @+3.0V (WDT ON)
     
  • E.S.D. Protection Up to
    - 2000V for Normal I/O Pin
     
  • Latch-up Protection Up to ±200mA
     
  • Package
    - 20-MLF